The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Hesitation--Big Time--Under Hard Acceleration 200 1987

Even though the pre pump has been replaced, it still may not be doing it's job.

It could be bad/defective, have wiring problems and not getting any juice, or a cracked/split rubber in tank hose. One would think that if the pump was recently replaced, then the hose should have been replaced also??

Try listening for a whine with the fuel filler cap off ,to confirm that it is operating.

Even better would be checking for volts and current draw with a DVOM.

Bentley lists correct current draw at 1-2 amps for 83- early 86 pumps, and 3-4 amps for late 86-93.

If it is operating correctly, and still no fuel,then you would have to pull it and take a look.
--
Gary Gilliam Sumerduck VA, '94 940 Regina, '86 240GL






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.