The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Can a 544 Rear Axle be used on a 210? 444-544

On the subject of rear axles, some time ago, John Parker was looking into the possibility of fitting a Ford 9 inch rear axle to a Duett. You might check with him on that.

The Duett has leaf springs at the rear and the rest of the contemporary Volvos have coil sprung rear ends. A friend did put a 544 axle in his 445, but required the spring perches from the old axle to be welded on to the new one.

On the subject of OD: My 210 has OD and despite still having the 4.56 gears, it is now relatively comfortable at cruising speeds around 70. It was the best upgrade I've done for driveability. Turns out you can still use the standard trans mount. You will still have to cut the trans tunnel and shorten the driveshaft. Since the Duett has a chassis, the structural integrity doesn't seem to be hampered as might be the case with a unit body car such as the 544.

Bob






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.