The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Changing rear brake pads 700 1989

Hi

Yesterday I did some work on rear brakes. I followed the FAQ and I got stuck at at this part:

"... open the bleeder and at the same time squeeze the pistons back using either adjustable pliers or a c-clamp. Use an old steel shim or tape on the jaws to prevent boot tears"

I have a 6 inch C-clamp but I just couldn't get either side of the clamp to fit in the space between the rotor and the piston. What size are you guys using? I tried using pliers but I didn't have on big enough for the jaws to wrap around the caliper. Which is easier?

"... If you have a tough time squeezing the piston back, place a wood 2x4 in the caliper space and use a pry bar to lever the piston back"

I tried the 2nd method as per FAQ but got stuck as my pry bar was too long to lever it in. I was also afraid it'll damage or dent the rotors.

I think either my tools are not correct or I'm missing something obvious here. Appreciate any advice.

Thanks






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.