The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

hose-splice method 200 1987

I think fuel line is rated correctly. Red rubber heater hose is not. Silicone tubing is good for it too, if you can find some, and it doesn't mind the exhaust heat either.

The lines run about $40-something apiece from Volvo. They come pre-bent and may be easier to do as a pair. This job is a LOT easier with the car elevated quite high, and the exhaust headpipe removed. (Remove 3 bolts at the big manifold flange, and drop the hangers to the rear.)

Also, be very careful when connecting the tubing fittings: properly aligned fittings spin on very easily. Misaligned fittings are very tough to screw down, and you can easily ruin either end. Be absolutely sure that it's threading on correctly before taking a wrench to it.
--
Rob Bareiss, New London CT ::: 87 244DL, 88 245DL, 90 745GL, 84 242DL project, 89 244 parts, 88 244DL to replace the 87






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.