The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

'90 240 driver's window seal 200 1990

posted by  Marlin Mangels on  Thu Aug 31 23:48 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Oct 21 15:41 CST 2014
[RELATED]

The lower inside window seal on my '90 240 rolls under when the window goes down, then snaps back into place after the window is down. It usually starts at about the driver's shoulder area and progressively pulls down about 6 inches of seal before the window clears the edge of the seal. The only part rolling down is the narrow upper 1/4 inch, so it pushes the door panel in just a bit each time. The front part of the seal also leaves rub marks on the window. Can this seal be repaired/replaced? I've cleaned the window and the seal, but that doesn't help. I've tried talc on the seal and that helps for a little while.
Marlin






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.