The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

WON'T STAY RUNNING 700 1989

I'VE HAVE A NO START PROBLEM WITH MY 740, WHICH i GOT SEVERAL REPLIES TO IN LATE AUGUST; Thanks for the help. Still the bugger won't stay running even thought it will fire. I rechecked the sensors and the wiring etc. I also did the test to check the load sicgnal from the fuel ecm to the ingnition control. The Volvo green books say the voltage from pin 25 to pin #8 on the Ignition control should be 0.1V with te key on and engine not running. I have a reading of .001V at the Ign. control end of the wire and .015V if taken with a pin in inserted into the back of the #25 connection at hte LH fuel control harness. I've seen a few misprints in the Volvo green books so I'm wondering if anyone know whether the 0.1v spec is correct, or if there is a mis print?

If 0.1 is corrct as apposed to .01v then it would indicate the ECU is okay, right?

fyi this car has about 330000 miles.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.