The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Water Pump Install Idiocy (or Idiot!)! 91 240 200 1991

OK - I put a new water pump on in addition to a whole bunch of other parts.....developed a very slight leak just 2" behind the top of the pump where the head and block meet. Decided to replace the pump gaskets as opposed to the head gasket as my install was the likely culprit. Proved myself right a couple of times over.

First, I found I left the original gasket in the hole for the heater tube, and installed the new one. No leak, but looked kind of "not right"! I removed them both and put the new gasket in the hole. Just one this time.

Started it up and coolant is running out near the heater tube like a faucet. How should the gasket on this thing be installed? Does it go over the tube? After screwing it up the first time, I have little to go by. Haynes and Bentley are silent best I can tell.

Love to figure out a way to do this without pulling the pump again and investing in my third gasket set!

Thanks for the help!

Dave






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.