The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

its time for some work! 200


240s don't often need the valves adjusted - but when you change the cam, you definitely want to check the clearances and adjust as needed.

The most cost-efficient way is likely to see what adjustments are needed when you install the new cam, and buy the few shims you will need at a dealer. You might end up swapping a few shims around between valves and so reduce the number of shims you need to buy.

Be sure to reinstall the cam bearings (hold-down caps) back into their original locations. I'm told they are factory-matched to the locations so the cam will rotate "true".
--
DAMHIK: Don't Ask Me How I Know - - - Sven: '89 245. 951 ECU, open-front airbox, E-fan, 205/65-15's, IPD sways, E-Codes, amber front corner reflectors. 500 mi/week commute. '89 245 #2 (wifemobile). '90 244 (spare, runs).






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.