The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

How to wire in a 'Rally gauge' instrument pack 140-160 1973

Hi,
I've had one of these 4 gauge plus speedo plus tach instrument packs in my 142 for a while and it works fine, but was looking a bit tired. So I bought another on ebay, but the wiring is slightly different. My old one had 2 pin plug (with a locating plastic pin) that brought switched power to the board. It was located on the bottom left (looking at the board from the rear). My new board doesn't have this, or any obvious way to bring switched power. Plus it doesn't work so I guess it needs that power.
The numbers I can find on the PC board for reference are

X 16.120/7271

993 087 121

and near the letters VDO there is

1234 016

Can anybody tell me how to get power or otherwise wire the board up?
Incidentally, both boards have a two pin plug near the votage stabiliser that doesn't seem to have any wires to go to it. Any idea what it is for?

Thanks in advance

JohnH
Sydney, Australia






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.