The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

spray pattern on injecters 700

You mean on your B230F engine right? That is simple enough, pull the two 10mm screws out of the intake manifold that mount the fuel rail, pull the rail complete with injectors and supply/return lines connected. Pull the negative wire off of the primary side of the coil and crank it over via the remote starter connection by the left front fender. I doubt that this will help you figure your problem out though and honestly if you cannot figure out how to check the spray pattern then you probably do not have enough experience to know what a good one looks like from a bad one. I have never had an LH injected car that ran rich because of a funky injector spray pattern. We used to have problems with this in the old CI beasties but the electronic stuff is much better in this regard.

Good luck,
Mark






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.