The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

idle control valve cleaning & adjustment of stop? 700

posted by  SLong on  Sun Oct 29 02:12 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 19:52 CST 2014
[RELATED]

I have a 1993 945T. I am posting this message on the 700 board as well because the idle control valve is the same in later cars. I took a look at the valve today and have some questions. What seems odd is that when the valve is closed (aganist the stop), it appears to be closed too far such that air can pass though it. Rotating the valve about 1/8th of an inch prevents air from flowing through the value. Moving it further opens the valve, as it should. It looks like the stop was adustable and set at the factory. Now it has a locking epoxy (?) preventing adjustment. Should the stop be adjusted so that the valve is actually closed or is there some other reason that it should permit the passage of air when on the stop? How do I get the epoxy out? Heat it?

My car has somewhat of an unsteady idle, which is why I took a look at the valve. I also just cleaned and adjusted the throttle body.

Could someone explain the signal that the idle control valve gets? Is it just 12V or 0V, or does the signal range from 0-12 volts (eg 0, 1, 2, 3, 4, 5, 6, 7...12V)? Is the valve either open completely or closed completely, or is it variable?

Finally, what lubricants (if any) should I use on the valve?

Thank you,
Steve
--
1986 745 w/ M46 200K since new, 1995 965 104K






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.