The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Torque Spec Question. 120-130

Sure. They are all the same (B16, B18, B20 and B30, anyway)
I'm not sure the direction is important but you start with the two bolts
nearest the center and then alternate front and back in a spiral pattern
till you get them all. Then go over in the same order at the next torque
level, etc. I usually go around twice at the highest level and sometimes
I get some more takeup which I conclude is gasket compression.

I've noted with the headbolt-mounted idler bracket that the bolt heads
are usually 5/8" where the OEM headbolts are normally 11/16", which gives
a bit larger clamping surface engagement. Also the OEM bolts are usually
necked down in the center, which is also a good deal since otherwise
the highest stress is at the root of the first engaged thread.
--
George Downs Bartlesville, Heart of the USA!






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.