The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Manifild Stud 1800 1970

posted by  MrV on  Wed Nov 1 16:20 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:15 CST 2014
[RELATED]

I have done similar approach except without the tube. I used a drill that fit snugly in the manifold hole to simply form a dish in the broken stud. This dish will then center a small (~1/8in) drill bit to allow you to drill a small hole in the exact center of the stud. Using progressively larger drill bits, I kept enlarging the hole. With some luck and PB blaster, you can use an easy-out to back the stud out of it's hidy hole. Be careful though....if you break the easy-out, you know have a hardned steel piece in there to deal with. If the easy-out doesnt work, then keep enlarging till you get to the right tap size and just re=thread.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.