The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Bump! 140-160

First think I would check the brushes, which should come out the back on an assy. which mounts with 2 screws and has the wires coming out which go to the VR (talking Bosch here).
If you have a seperate VR on the fender, you could try jumping it, but you better know what you are doing as you could make some big sparks and maybe some burnt wires if you connect it wrong. Basically what you want to do is apply 12v to the field terminal of the alternator. That should cause it to go to full output, around 17volts, so you really don't want that on too long like that.
If I were you, I'd get a used alternator from a 240 and put it on. The VR is built in and at least you would know that it was working.
--
744 & 745 GLE's (IPD a-sbars)16v M46, 245 SE(IPD a-sbars) auto, 242Ti M46(IPD springs and bars), 745GL 8v auto






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.