The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

K-jet fuel lines...repair 200 1982

I need to replace a section of fuel line on a k-jet equipped car that I'm working on. The line coming out of the fuel accumulator, which is a fitting with the hard plastic fuel line shrunk over it, was replaced and rigged with a piece of standard fuel line and tied into the fuel line running under the car about a foot in front of the accumulator. (There is about a foot long section of the original tubing missing)

What I'm looking to do is have some sort of line that I can put over the barbed fitting that goes into the accumulator and then will run up to where the old fuel line terminates. Is there some sort of standard fitting, barbed on both ends that will work as a splice?

I'm assuming that fuel line that indicates that it is ok for fuel injection will suffice, although I know k-jet runs higher pressures than electronic ignitions do.








USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.