The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Couple B20E Head questions 120-130

I'll try and be briefer than ususal here.

I have my B20E head off for new head gasket. I plan to give the valves a quick polish, but have a couple of specific questions before I button it all back up.

#1 The 20E does not have the little dome-shaped plastic caps on top of the valve springs like on my B18. Should I put some on?

#2 I have a set of new unused B18 rubber spring-wound valve stem seals left over from my almost used up rebuild kit. Should I put these new seals on the 20E while I have it out? Will they fit with the bigger valve. I do have a valve spring compressor tool, and have previously dissassembled a B18 head so it shouldn't be to hard for me to get to them.

Note: I know the the B18 head gasket won't work on a B20, but all the other gaskets did fit perfectly.

#3 could a valve problem lower my compression test results to less than 30 psi?






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.