The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

headlight relay question 200

First, thanks to all who have answered kindly my sometimes amateur questions about wiring. But, alas, I have another:
From the 9004 male adapter, I would run three wires from each: one to the high beam relay, one to the low beam relay, and yet one more for a ground (although Ryan R said I could just attach nothing to that pin out). This would, in turn, be used to activate the relay. I get this. Now, for my question. There is only one input connection on each relay (86 on the Bosch). How, then, can I attach a wire from each 9004 adapter to activate, for instance, the low beams when there's only one input? Or, does this tell me that it only requires one wire per relay to control the relay?
Thanks again.
--
crazy driving: Cincinnati, OH, 1993 244 Limited Ed. 'Classic' model (daily driver). 65,xxx k. Mods: ipd sway bars, strut to firewall braces, Bosch amber fog lights, 52mm tach.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.