The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Replacing U joints 700 1989

Grease fittings are a good thing. The original Ujoints have a set screws that can be removed and a 1/4 20 fitting can be installed. An occasional shot of grease from one of those disposable mini grease guns (limited space) should insure a lifetime of service. On the 740 cars a hole needs to be drilled in the plate blocking a straight shot at one of the fittings once installed; a step drill can be used with the plate still in place.

If I had to replace one Ujoint I would probably replace them all.

Be SURE that the segments of the driveshaft are reassembled with the same orientation to each other to help insure proper vibration free service. Mark them in some way (file marks, center punch dimples, etc)so there is no question. If you have the Ujoints installed at a shop be sure they understand this and check their work before you leave the shop when picking up the finished assembly.

Randy






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.