The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Rust Never Sleeps 200 1990

Great write up, Roadrunner!
I can only add a few things.
POR-15 is a urethane based primer which cures with moisture in the air.
It bonds best to a rough surface or flash rust.
Cure time 1-3 hours to tack.
It has little UV resistance,and a finish coat should be used where it
is exposed to sunlight,unless flat black is desired.Silver is available also.
When cured it is rock hard,practically impossible to sand,and so glossy
that adhesion is a problem for subsequent coatings.
Therefore it is highly desirable to add coats when it is tacky,all the way
to the finish coat. In this case probably Volvo touch-up paint.
Metal Ready contains phosphoric acid control it.
A late model {93} windshield will be the most trouble free.
Ken
--
White 86-245 DL, M 46, IPD bars & Wagon Overloads,Commando Bumpers,SS Belly Pan & Air Pickup,Straight-Shot EMT Chassis & Tower Braces,Scorpius Alloys,2 Belt No AC Conversion,Black POR-15 No Glare Front End






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.