The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Clutch cable 700 1986

Got this '86 745 a month ago with no history and 230K miles and an M46 tranny. Clutch cable broke after before I had driven 1000 miles and I found that the "knob" at the top end had broken off end of the cable, right where it enters the knob. This allowed the steel block at the other end to fall out and go bouncing back behind the car. Fortunately I retrieved it. Unfortunately, the FAQ has little on clutch cables.

My questions are:

The cable appeared to be very new. Is there anything that might have caused this one to break that would also break a new one?

How does one install a new cable. Do you snake it through from the bottom and put the knob on the top end after?

That steel block with the groove gets the lower end of the cable through it and is then just held in by the tension on the cable when it's properly installed, right?
--
Andy in St. Paul - '91 745 218K mi, '91 745 210K, '90 744 189K, all Rex-Regina - past 240s






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.