The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Heaterhose from firewall to heat temp valve too short?? 200 1990

Hi all
Newest update here on my heater core replacement project. I've re-installed the Heater unit in the car, everythings lined up and i got the bolts hand threaded. Everything seems to be going smoothly until i go to attach the new heaterhose from the firewall to the temp control unit, too short! Arghh, i can only get the hose on like a quarter of an inch.
So I'm thinking either i have to attach the hose to the temp control first, that way giving me more leverage on top to pull the hose onto the firwall male connector, or get a new hose. If i try to use the old one i might be able to get the one end on the firewall connect just enough to get a hose clamp on it. But i might also bend around the temp control valve too much.
Has anyone else had this problem in the past? Where should i get a new hose?? Note.. I'm using the scantech control valve from fcp..
thanks
cp






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.