The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

upper wagon spring seats 120-130

Rear spring rate on the wagon is slightly lower than that of the sedan. But because of the difference in suspension design, the effective rate (measured at the wheel) is higher on the wagon. Therefore, putting stock sedan rear springs in the wagon will result in a slightly stiffer ride.

Based on info in the green shop manual, looks like there is indeed a big difference in diameter, with the sedan spring being 1/2 inch smaller. No unladen height specs, but they are nearly identical heights (within .07 inch) at identical loading.

Bottom line... I would think you would probably be okay using sedan springs if you use sedan seats, but I would definitely want to talk to someone that has been down this road, to confirm there are no other pitfalls.

Gary L
--
1971 142E ITB racer, 1973 1800ES, 2002 S60 T5






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.