The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

How to install a M41? 140-160

I may have a O.D. crossmember around here somewhere. I cant remember if you have a MIG or not, but its possible to cobb up a normal crossmember to fit between the gearbox and overdrive. It mounts in the same holes on the frame though. Only the AT's use the rear set. If you need to have a drive shaft made and you don't mind a trip to Winchester, I reccomend G L Dunn. (www.gldunn.com) I've had them make up several custom drive shafts for me, and they could put the large front yolk on the small shaft, etc. I seriously doubt you'll have reliabilty issues with the OD unit, after all, I rallycrossed my street car for 5 years, and never broke the shaft that extends into the OD unit. Just push the clutch in when you engage the unit and there will be no scattered linings or damaged bits. :)
Sven is still ill, I think I need to borrow that diagnostic thingy you have (if you still have it...) at the next track day.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.