The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

replace single with double downpipe exhaust manifold 120-130

posted by  someone claiming to be mariom on  Wed Feb 28 16:44 CST 2007 [RELATED]

I made half washers. I measured the differences and sanded down washers to the right size. I then tack welded them to the original thick dished washers and ground everything pretty. They work great, the only downside is that I have to keep track of which washer goes where. Never try tightening them things down without making up for the difference, I have seen a cracked manifold due to this procedure. It was able to make up the washers in about an hour. Much cheaper than taking it to a machine shop.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.