The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Speedo cable question.. 120-130

Any tips for reseating the drive cable without pulling the cluster?

It's fairly simple to reconnect the speedo cable under the dash. I've had to disconnect and connect it while going down the road when I've heard grinding noises from the odometer. You can find a path by feel to where the speedo end on the right side of the dash cluster is located and thread the cable in the most gentle curve from the firewall grommet to the cluster, feed the square drive end into the speedo and then thread on the ffitting - hand tight is enough.

From the speedo end, you can pull the inner cable entirely out of the sheath/housing. You may find that the tranny end of the cable has a slight kink (due the the abrupt right angle turn), which you can probably straighten out. I'm always on the lookout for another right angle drive.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.