The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Fuel draining back to tank? 120-130 1967

John;

You are absolutely right, but I have seen where one of those valves was completely shot, but the car (Toyota) ran and started without too much strangeness (it was a carburatet car and - from memory - it was I believe the output valve which crumbled apart)...the way I reconciled this is that the valves are essentially two check-valves in series, with a diaphram variable volume in between, allowing flow in ONLY one direction...to the carb!...so if the output valve goes away, and the diaphram decreases the volume, I figured the pump flows toward the carb, when the diaphram then changes direction and increases the volume, it was somehow easier for fuel to flow from the (vented?) tank through the input valve than it was for fuel to get sucked back from the (sealed?) bowl.

Point is that....wouldn't both valves have to be open to flow to allow drainage back to the tank?

Interested in the answer too!






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.