The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

PV B18 Hood adjustment 444-544

Hi all; I'm a bit new to this vintage Swedish stuff after a lifetime of being around Triumphs. I need to adjust the hood of our '65 PV544 B18, following an accident repair. The workshop manual gives no guidance. Is all the adjustment with the visible bolts on the hinges? (i.e., the four bolts you can see on the hinges after the hood is open). Is there more to it than that? The hood sits a bit low at the front (though not too bad), but the big problem is the angle at which it sits. The gap between the trailing edge and the bulkhead is too large. The trailing edges of the hood's vertical sides are at a different angle than the bulkhead. The bottom of that vertical edge is almost touching the body, while the top, where it starts to bend around to the main trailing edge across the car, has a large gap. Can anyone offer any tips? Thanks and regards; Tim






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.