The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Frozen clutch slave bolts...advice? 120-130

My parts car really doesn't want to be recycled it seems. Already broken one socket on it.

But the issue that has me stumped is the clutch slave bolts are frozen. Since it is threaded into the aluminum bellhousing I'm feeling apprehensive about just applying bigger levers. The heads are wanting to round as it is.

Any suggestions on removing without killing the bellhousing? PB Blaster isn't likely to penetrate to the threads in this instance.

I've only tried sockets with a breaker bar. I don't have an impact driver but I'm about ready to buy one if they really do make a difference with frozen bolts.

There are many more to come I'm sure...

I may end up cutting the hydraulic line and dealing with it out of the car. Doubt the lines are worth saving after sitting for ten years anyhow.

Thanks all,

-Mario E.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.