The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Lower wishbone bushes 120-130 1963

My Haynes manual is pretty confusing where it describes replacing the lower wishbone bushes. For a start it indicates special bushes that should be used if your car has radials. They are identified in a figure as having 3 slots in the flange end. I haven't been able to find reference to any different part numbers for these bushes. Should they be something different for radials?

The text of in the Haynes manual says that both bushes should be pressed in with the flange towards the rear. This doesn't seem to tie up with the figures which show the front one with the flange forward and the back with the flange backwards (which is how is appears to be on my car).

I haven't checked the green book yet but does anyone have experience with any special lower wishbone bushs for radials? Which way should the flanges face?






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.