The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Control arm tq S90-V90

posted by  poolman on  Mon May 14 03:49 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Dec 26 02:03 CST 2010
[RELATED]

Thanks for the replie on the control arms-will set up the tq today for taking care of that problem. On the large bushings-I took a block of wood and beat the old ones out-then used a little white lithium grease on the edges and carefully started the bushings back in-with my vise I worked them around the top edge of the bushing being carefull not to get to the center and worked the bushing back down slowly until seated-it's like working the bushing back 1/8 of an inch at a time and making sure your getting it seated back where it needs to go and not damage the sucker while pushing it back in.
Hope that helps
Poolman






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.