The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Help in identifying engine block and head 1800

Aside from which block/head it is, if you have a stuck open valve there's a good chance the problem is down inside the block with the lifters.
Try to extract the lifters from the top and see if one matching the stuck valve is also stuck at the top of travel. If they don't lift out easilly, they may have caused the problem you have with the valves. If this is the case, you may have to pull the motor to get the lifters out from the bottom. Check the cam for damage also.
I would dis-assemble the head and look for bent valve stems and broken springs.

If I were you, I would get a good B20B head and stick with stock B20 components for lifters and push rods, not mix the B18 head and B20 block.

A B20B head on the B20E block is a great performance combination for a carb'ed engine.
--
'89 245 sportwagon, destroyed by hit & run driver, RIP. '04 V70 2.5 T Sportwagon, 12k mi and '91 245 5-speed, 209k mi, replaced the '89






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.