The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

pulled trans, which seals to replace? 200

Do yourself a favor and use factory Volvo seals as all rubber is not created equal and you really do not want to have to pull the trans again because you save a few bucks on the seals. The front pump seals can be kind of tricky to do, if you can get your hands on some hydraulic assembly lube to put them back together with it will help big time. If you look in the book it will show you pulling the front pump out of the case to change out those seals among other things, to change out just the seals if is far easier to simply pull the bell housing off as an assembly. Cleanliness is the order of the day on this operation, make sure everything is squeaky, squeaky clean before you put that bell housing back on over the pump. Make sure that you change out both shift shaft seals and the input shaft seal as well while you are in there.

Mark






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.