The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

No-start after installing new plugs, & cap..could it be the ECU? 200 1993

Trying to get "el Avispon Verde" up to snuff to make the trip from Texas to Conn again. He's a 93 245. LH 2.4 injection system.
today I installed new Bosch platinum plugs (.30 gap) a new Bosch cap and a good used rotor. It ran for a bit, then died. Started up, ran very ragged then died for good. Cannot start up at all. Cranks like a demon, though. On board code reads 1 1 1. Spark present at both coil wire and at spark plug (though weak=yellow). took apart fuel rail, and cranked out a bunch of gasoline. Fuses are all OK,even the big ones by the battery. Replaced the fuel pump relay, tried a different coil,made sure the wires are on the cap correctly for the 1 3 4 2 firing order (clockwise).
I have removed the throttle body for cleaning.
I'm suspecting an ECU problem...are there any issues with 1993 ECU's?
thanks for any help.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.