The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

spring washers 200

You are right on about not making those nuts too tight. If you don't trust your torque-by-feel skills, borrow a small torque wrench to make sure these are put on to spec, and check again after the motor has been up to temp. Don't think of using that big torque wrench you use on your lug nuts and head bolts.

Any time I found someone used lockwashers on an exhaust part I knew it was the weekend mechanic's improvisation. In this case, the root of "improvisation" and "improve" put the two words at odds. The heat destroys them. The nuts won't seize to the manifold, though they might stick to the stud better than the stud sticks to the head - which is a good thing.

On a turbo, I recommend Doug use the best he can afford to avoid the pain of broken studs in the future.
--
-K (hope springs eternal)






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.