The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Advanced Timing (Timing in general) 700 1987

If you have a distributor with a Hall effect sensor (LH 2.2 = B230F, up to and including 88, B230FT, up to and including 89) the sensor is mounted solidly to the distributor base plate. This plate can be rotated relative to the head to adjust the timing. If you have LH 2.4, the distributor contains nothing but the rotor, and the timing signal comes from a crankshaft sensor mounted at the top of the bellhousing, that reads holes on the perimeter of the flywheel. This sensor is fixed in place and is not adjustable. Turning the distributor on these cars does not adjust anything, it only makes the spark jump from a different point on the tip of the rotor to the electrodes on the inside of the cap. That's why the electrode on the tip of the rotor is about 1/2" long---so that it will work properly, wherever the distributor is "adjusted"






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.