The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

AMM problem redux 200

well I finally got back to that 85 245 I'm working on & have some more info. The thing now starts & dies with the AMM connected, will sort of run but barely accelerate & not idle with it disconnected. I replaced the flame trap & related hoses checked & replaced the plugs,& cleaned the throttle body. It acxts like it's running lean but I could not find any vacuum leaks. Fuel pressure is ok & volume seems adeqauate. No leaks at the press. reg. & it reacts normally [increse in pressure when vac. is disconnected] & the pressure holds at shutoff for 15 min before gradually dropping. I checked the throttle switch with an ohmmeter & had cotinuity between term. 2 & 18 at idle & nothing after that. Anything I'm missing in that test or is it just a bad TPS? Any help would be appreciated as the owner has been without his car for some time & has spent lot's of cash to no avail. Thanks

Mike M.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.