The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

#2 cylinder not firing 73 164 140-160 1973

posted by  someone claiming to be JR142 on  Sun Aug 26 15:13 CST 2007 [RELATED]

I've posted this before and did what was recommended finally, but to no avail. So here goes again. #2cylinder still missing. Whats been done thus far: New fuel pump and filter, put in new injecter, changed distributor as shaft was loose, switched wires around on distributor all good and getting spark,replaced cap & rotor, checked valves--all have proper clearance--no flat lobes, front and rear 3 injectors make noise, no vacuum leaks.
I'm thinking at this point that I should trace the injecter wire back from #2 to see if there is a break in it. I have no tools to check to see if it is getting a signal from the ecu. Any further things I might check?
Thanks in advance
John






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.