|
Hi All.
Probably a dumb question?
How do you locate TDC on a B234 16V?
The cams are straight forward.
But i am confused with the cranshaft.
If i line the notch up with the 0 alignment on the front cover Piston #1 is not up at TDC.
Correct me if i am wrong but #1 is the closest to the front bumper.
I have also tried 2 marks underneath as stated in the FAQ.
found a mark underneath on the rear timing cover and another mark on the block timing case.
I am lost????? & starting to get frustrated.
Suspecting my car has a timing issue. Was running very rough & rich. Now it cranks but won't fire up. Excellent fuel, excellent spark.
Rich problem fixed - dodgy ground to injectors.
Changed ECT switch, FPR, filters, RPM sensor. Dizzy cap & rotor button.
Check ICV, TB, AMM, relays, etc.
Still not starting, although the cranking is worse & it has started Squeeling during start up since i have mucked around with the timing belt.
Thanks in advance.
--
1989/90 740GLE, B234F
OLD TOY - 1985 760 Turbo Intercooler, Rebadged OVLOV, Turbosmart Type 2 BOV and Gated Boost Controller, Ram Air, Brass Button Clutch, Jamex Lowered, H/duty Mahle pistons, O'ringed Head, T3/T4 Turbo, Ported head, 3 Inch Exhaust
|