The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

bizarre troubleshooting aid..... 200

Got the blower motor changed on saturday....see other post...got everything put together and while driving home noticed the upshift light was on....but the OD was working fine....click on..click off...next day started the car....OD light is flickering fast almost on solid....revved the motor a little and the light was on solid....hmmmm....pulled the gauge cluster and found that in my haste to be done and gone, i hooked the tach wire (red/white) where the OD (red/yellow) should go...on the spade connector on the lower right as you're looking forward....Sooo..if you're without any other way to verify the ignition pulses hooking up the tach wire to the spade lug on the back of the gauge cluster will pulse the OD upshift arrow.....could even hook up a 12v LED to the tach wire and then just ground the other side of the LED.....anyway, just thought I'd pass this along..........j.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.