The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Brake job leads to stuck wheel? 700

Okay, so I've already taken my friend out to the virtual woodshed after she drove her '88 740 until the entire inner plate of her LF brake rotor was ground off and the caliper subsequently fell apart. However, after replacing caliper, rotor and pads and bleeding the system, the brake seizes up when the lug nuts are tightened. If they're left loose, the wheel spins freely, with just a bit of grinding. Tighten the wheel properly, and it turns with steadily more resistance until it locks up, and the only way to free it is to remove the wheel. I can't see anything physically gumming up the works.

Any ideas, other than, "You should have let me change the pads two months ago when it FIRST STARTED grinding, M!!!" (Though, you can feel free to reiterate that to her too, and I'll pass it on)






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.