Community Forums:

for the SRS reset you need a piece of wire with a spade connector on one side and a stripped and tinned end on the other. with the key on and the car NOT running. you ground the wire between the SRS plug(found on the dash behind a plastic cover that says SRS next to the seat belt light)and any ground ( I use the cigarette lighter bezel) for 5 seconds then the light (SRS) should blink a number of times(between 1 and 5) when it is done blinking ground the wire 5 more times, for more than 1 second and less than 5 seconds the light will go out and stay out. When you cycle the key it will work properly, don't be surprized if you have to do this many, many times I had to do my own about 15 times before I got the timing just perfect. the code or number of blinks that you get from the SRS light tell you wivh component set the light yours should be 5 blinks. good lusk to you!