The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

V90 Timing Pulley Bolts S90-V90

Hello,

I recently changed the Timing Belt, Water Pump & two Pulleys. In attempting to remove the T45 Idler Bushing bolt I snapped the tool off. The second try with a new tool resulted in rounding the shallow star bolt head. O.K., the idler arm appears to move freely (the bushing I couldn't lubricate) but without its removal I cannot hold/see the bolt (head) that secures the pulley nut as the bolt head resides behind the idler arm I can't remove. This concerns me as the movement of the belt will tend to loosen rather than tighten this nut. I've driven 600 miles so far & torque remains low at about 10 ft-lbs before the bolt & nut turn together. Can anyone provide a picture of what the head of this bolt looks like so I can make a tool to hold onto it from behind? Is it another torx bolt or a hex head? If no picture can you advise type & size?

Thanks greatly,
Bob






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.