The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Make your own 200

posted by  Trev29 on  Wed Nov 7 00:37 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 05:56 CST 2014
[RELATED]

The most important part of a pressure bleeder is an altered reservoir cap with an air valve installed and a tube attached. To that you attach anything that generates pressure eg. tire pump, tire pressurized to around 10 psi.

Myself, I obtained a spare reservoir cap, made a hole and installed a tire valve. The 6' vinyl tube has a tire valve head attached (obtained from cheap bike pumps) to each end using hose clamps. One end is clamped to the tire, the other to the reservoir cap.

Keep in mind that you'll be pumping air into the reservoir with this setup, so though there won't be any spills as described in Farm Boy's pressure bleeder experience, you need to stop the operation and refill as the fluid level in the reservoir gets low. Hence the suggestion that you maintain air pressure to around 10 psi. Any higher and you risk forcing the fluid out the bleeder faster than you can refill the reservoir.
--
1980 245 Canadian B21A with SU carb and M46 trans in Brampton, Ont.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.