The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

HEADLIGHTS 200 1993

Much thanks to lucid; he often has the pinout and wire colors for us.

The yellow and white wires at the relay will have power only when that relay is plugged in and headlights are switched on with ignition in an appropriate position.

If all seems well at the relay you can test that same yellow wire up front where it meets the high/low "step" relay. With headlights switched on it should have 12V.

That front relay routes the voltage EITHER to the high beams via red wire, OR to the low beams via blue wire, first to the bulb failure sensor and from there to the low beams. The high beam circuit routes directly to the bulbs skipping the failure sensor.

Good luck!
--
Sven: '89 245 NA, 951 ECU, expanded air dam to 7' from ground, forward belly pan reaches oem belly pan, open-front airbox, E-fan, 205/65-15's at 44 psi, IPD sways, E-Codes, amber front corner reflectors, quad horns, tach, small clock. Wifemobile '89 245






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.