The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Interesting restomod design study 120-130

It would be a lot easier to do it in aluminum, which in comparison with stainless, is far softer and easier to work, plus any scratches or tool marks can be polished out. The aluminum would have to be coated with something though, or you would have to keep after it with the metal polish.

For a good example of work of this kind, try to find pictures of the buses used on the island of Malta in the 60s and 70s. They took ordinary boxy buses (think school bus) all of which were the same ugly shade of green, and added many of the styling gimmicks and details of 50s-60s Detroit Iron, all of which was hand formed metal and plastic (for things like 59 Chevy teardrop taillights) There was an article about these buses in Road and Track magazine, some time in the late 70s, and I have seen other references to them.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.