The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

New ECU, Engine Wiring Harness, still no start. 700 1987

I just got two ECU's online for my 740, tried them both, but my 740 still doesn't work. I have a 1987 740 sedan (no turbo) B230F. I replaced the wiring harness, checked the fuel rail leading to the injectors after checking pumps and pump relay and the lines are pressurized with gas. I put some fuel in the intake and she fired right up then died. So my ignition is working and there's fuel heading to the injectors. However, I pulled the plugs and they were dry after cranking the engine, so I am thinking that I'm having an injector problem. I connected the two large wires in the radio control relay and still no go. I tried installing a Jetronic 511 and 544 ECU, still no go. Could the ignition control in the driver side fender by the headlights have something to do with it? Any ideas? I am stumped and need help.
Thanks a ton.
John






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.