The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Synopsis of Tranny swap 200

uid 29404's pic
posted by  punk240 on  Fri Dec 7 14:11 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jul 14 15:23 CST 2014
[RELATED]

Finally decided to pull the AW70 and go with my old M47
(AW70 leaks at speeds over 70 and forced into a down shift; gasket)

So here's how i plan it:
Elevate entire car on jackstands (duh)
Insert block of wood between block and firewall
Remove Center Support Beam
Remove Detach Drive shaft from Flex Joint to Pumpkin
Attach Tranny Jack (i bought one 6 years ago, awesome booger for $40)
Proceed with Cable and Sensor reoval
Remove Shifter linkage and hardware
Loosen Fan shroud
Allow tranny to tilt back to access all bellhousing bolts after wood is removed.
Position floor jack under Oil Pan for angle control (and backup support)
Remove bolts (inc.starter)
Remove Torque Converter during Tranny roll away

Seems pretty straight forward...

Installation for the M47 should be the reverse of the removal, right?

I intend to well document this CPS grafting to the M47 for future use by other brickers... I'll be using the crap out of a my Dremel! lol

The Clutch Pedal block? I figure remove the driver's seat and lay on you back on the floor board.

I WILL be using the M47 drive shaft and the entire Dana 30 sans Calipers.

I'm a little concerned about the Flywheel: Are they manufactured to take both types of transmissions? Bentely shows they are in their illustrations...

Oh well - this should be fun.. Thanks for any subsequent advice on this.

Tim
--
1992 - 244 - AW70 'Soft Ride' / 1987 - 244 - M47 (Hydra, turbo bars, bilstein, urethane bushings - now deceased)






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.