The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Stress Level Dropping.. 120-130

As Ron pointed out, your firing order isn't backwards. It's just that something isn't "properly" indexed. What you have will work just fine - it's just not the 'recognized standard' that was used by the factory. Functionally identical - no worries.

Either the distributor drive gear in installed 180 out, as suggested; or the coupling at the very bottom end of the distributor was installed 180 out. This is the odd piece with two tabs which interface with the distributor drive gear. It's held in place with a pin, and is then wrapped with a wire retainer thingamajig.

Anyway: it's easy and fairly common for someone to put this on wrong way around; if that happens, the result is:

Exactly what you've been facing.

Good news: now that it's working, you don't have to change or fix anything more to drive it happily about. If, at some point, you decide you'd like this corrected, you can get around to it at your convenience.

Best,

Cameron
Rose City






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.