The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

85 240 brake bleeding problems 200

Ive been continuosly trying to bleed this brake system after replacing the distribution block with a new one, LF caliper - new and the punch marks that volvo put in both lined up so it must have been rebuilt correctly. also when i replaced the claiper i pinched off the flex hoses, so ive tried replacing those and still a spongy pedal.Also ive tried 2 new master cylinders
Ive been using the bleeding procedure from a haynes manual LR, LFupper, RF upper, RR, RF outer then inner, LF outer then inner.
Ive used an assistant to pump up the pedal and i crack the bleeder loose.
then ive put a rubber hose in a bottle left the bleeder open and pumped the pedal a bunch of times and then shut the bleeder.
nothing seems to be working

on a new master cylinder, could pushing the brake pedal all the way to the floor ruin the seals? I would think not, but as u can see i am grasping for answers.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.