The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Cruise Control 200 1977

I saw a 1983 Volvo at the junkyard, it had a vacu-servo for connection to the throttle pulley. I saw the black computer box underneath the dash on the passenger side, and the wires from the stalk of the turn signal to the computer itself.

I know that later models used an electronic speedometer, and the computer box interfaced with the cluster itself.

My question is that if I install the servo, computer, stalk wiring, and speedo sensor along with a new cover to the rear differential, what electronics are needed from the cluster to interface with the cruise control computer? Can they be separated from the cluster and installed into a separate box? I'd like to keep my dashboard intact as the smaller cluster was used in the 1977 264.

I installed a 1983 B23F engine into this car, so the throttle connection should be simple.

Any comment / suggestion would be appreciated,
Goatman






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.